Biobased

BioCorr®

Water-based, biobased rust preventative that leaves a virtually undetectable dry film.

  • Helps create clean workplace and prevent material waste.
  • Multi-metal protection.
  • Contains 64% USDA certified biobased content.
  • Environmentally sound alternative to petroleum derived products.
  • BioCorr® ATF (54% biobased content) available for compatibility with transmissions.

EcoLine® 3220

Ready-to-use canola-oil-based rust preventative.

  • Tenacious film clings to metal surfaces.
  • Contains 99% USDA certified biobased content.
  • Multi-metal protection.
  • Good lubrication properties.

EcoLine® 3690

A biobased ready-to-use temporary coating designed for severe marine and high humidity conditions.

  • Contains 72% USDA certified biobased content.
  • Extreme corrosion protection.
  • Multi-metal application.
  • Leaves behind a light, oily film.
  • Canola-oil based.

EcoLine® Long Term Rust Preventative

Biobased rust preventative that provides long-term protection in indoor or outdoor conditions.

  • Contains 85% USDA certified biobased content.
  • Provides multi-metal corrosion protection.
  • Environmentally conscious replacement for petroleum-based rust preventatives.
  • Low VOC.

Water-Based

VpCI®-316

Metalworking liquid for protection of copper, brass (<30% Zn), silver, and other copper alloys.

  • Leaves light semi-dry film for stamping or rolling (depending on concentration).
  • Replaces slushing oils after pickling and temper rolling.
  • Low VOC.

VpCI®-337

Vapor phase Corrosion Inhibitor fogging agent for indoor storage and packaging uses.

  • Ideal for edge protection of coils and stacks.
  • Can be fogged or misted into containers, cavities, pipes, etc.
  • Provides multi-metal protection.
  • Excellent vapor-phase protection.
  • Biodegradable.
  • Available in EcoAir® air-powered spray cans.

VpCI®-338

Waterborne corrosion inhibitor acceptable for use on steel or tinplate in food packaging according to FDA CFR 21, §178.3300.

  • Ideal for lap and edge protection of metal stacks and sheets.
  • Mild cleaner.
  • Multi-metal protection.

VpCI®-377

Water-based rust preventative concentrate with a wide dilution range.

  • Forms clear dry film that can be painted over.
  • Not necessary to remove before further processing.
  • No hazardous decomposition byproducts.
  • Effective at low concentrations.
  • Nitrite and phosphate-ester free.
  • Multi-metal protection.
  • Available in EcoAir® air-powered spray cans.

VpCI®-378

Water-based concentrate designed as a complete replacement for oil-based corrosion preventatives.

  • Ideal for ferrous metals.
  • Stable at higher temperatures for dipping baths.
  • Excellent performance in humidity testing.
  • Clear, easy to remove film.

VpCI®-379

Temporary film for storage and shipping protection of multi-metal parts.

  • Forms a dry film.
  • Excellent humidity results.
  • Easily removed with an alkaline cleaner.

Provides indoor and packaging protection

Oil-Based

VpCI®-322

Oil-based rust preventative concentrate for mineral-oil-based lubricating or hydraulic oils.

  • Provides multi-metal protection especially on zinc, aluminum, magnesium, and yellow metals.
  • Filters through a 5 micron filter.
  • High temperature resistance.

VpCI®-323

A vapor-phase corrosion inhibiting oil-based concentrate.

  • Naphthenic-oil-based.
  • Provides multi-metal protection.
  • Contains a lubricant additive.

VpCI®-325

A ready-to-use vegetable-oil-/solvent-based liquid (with lubricant properties) for general purpose corrosion protection in a wide variety of applications.

  • Long-term indoor protection.
  • No cleanup required.
  • Water-displacing.
  • Non-flammable.
  • Available in EcoAir® air-powered spray can.

VpCI®-326

Oil-based rust preventative concentrate for mineral-oil-based lubricating or hydraulic oils with excellent vapor-phase protection.

  • Excellent vapor-phase protection.
  • Excellent indoor protection.
  • Low viscosity.

VpCI®-329

A naphthenic-oil-based vapor-phase corrosion inhibiting concentrate for use with lubricating and hydraulic oils.

  • Excellent protection in outdoor sheltered conditions in coastal environments.
  • Effective on multi-metals.
  • Available as ready-to-use rust preventative (VpCI®-329 D).
  • Commercial equivalent to MIL-PRF-46002B.

VpCI®-330

A clear, ready-to-use low-viscosity rust preventative, great for metal parts that require an almost invisible coat of oil for further processing/shipment.

  • Easily sprayed using handheld trigger spray bottle.
  • Protects ferrous metals
  • Compatible with yellow metals.
  • Contains no OSHA hazardous components.

Solvent-Based

VpCI®-277

A ready-to-use rust preventative for preservation of metals in storage and during transportation.

  • Forms dry protective film.
  • Low VOC.
  • Ideal for robotic assembly of precision components with tight tolerances.

VpCI®-327

Ready-to-use solvent-based corrosion inhibitor with contact and vapor-phase protection.

  • High vapor-phase protection.
  • Partially drying.
  • Good sprayability.
  • Multi-metal protection.

VpCI®-340 CLP

A cleaner/lubricant/protectant for a wide array of commercial and industrial applications, especially firearm maintenance and storage.

  • Excellent water-displacing characteristics.
  • Loosens organic and inorganic residue.
  • Forms superior lubricating/protective film.

100% Vapor Phase

CorroLogic® Fogging Fluid VpCI®-339

A ready-to-use 100% Vapor phase Corrosion Inhibitor product for preservation of void spaces comprised of multi-metals.

  • Forms a thin, self-healing film.
  • Fast-acting, convenient to apply.
  • Soluble in water and hydrocarbons.

Contact Us